Solar Panels in Hyattsville, MD: Pepco, Prince George’s County Credits, and Real Costs

Rooftop solar panels on early-1900s homes on a tree-lined Hyattsville, Maryland street

Solar in Hyattsville, MD comes with a county twist that most Maryland guides miss. Hyattsville sits in Prince George’s County, not Montgomery, so the local rules that decide your cost are different: your permit comes from the county rather than the city, and Prince George’s County offers its own solar credit and grant that Montgomery County homeowners cannot claim. The statewide pieces are the same Maryland math, a Pepco bill that keeps climbing and net metering that pays you back today but changes in 2027. This page covers what going solar in Hyattsville actually involves in 2026, who your utility is, the real electricity rate, the Prince George’s County programs worth chasing, who issues your permit, and a payback estimate built from your local numbers, so you can check your address in about a minute. Updated for June 2026.

Hyattsville solar at a glance (Prince George’s County, 2026)

Is solar worth it in Hyattsville in 2026? For most homes, yes. At Pepco’s corrected rate of about 22.2 cents per kWh, a typical Hyattsville system pays back in roughly 7 years on bill savings and Maryland SRECs alone, and faster if you land the Prince George’s County solar credit (Maryland PSC, as of June 2026).

  • Prince George’s County has its own solar credit worth up to $5,000. The county Alternative Energy property-tax credit covers 50 percent of an owned system’s cost, capped at $5,000, which Montgomery County no longer offers (Prince George’s County Office of Finance; DSIRE, as of 2026).
  • A county program, Solarize Prince George’s, adds a solar grant. It offers up to $10,000 for income-qualified homeowners in a designated Energy Resiliency Community, or up to $5,000 for other homeowners who buy a system (Solarize Prince George’s, as of 2026).
  • Your permit comes from the county, not the city, and it can be automated. Hyattsville has no city permit office, so Prince George’s County DPIE issues your solar permit, now through the SolarAPP+ instant-permitting platform for eligible systems (Prince George’s County SolarAPP+, as of 2026).
  • Your electric utility is Pepco, not BGE. Hyattsville is in Pepco’s Prince George’s County territory, and Pepco administers your net metering under Maryland Public Service Commission rules (Maryland Office of People’s Counsel, as of 2026).
  • A 6 kW system on a Hyattsville roof models about 8,250 kWh a year. A per-address NREL PVWatts run for ZIP 20782 returns roughly 1,376 kWh per kW of panels (NREL PVWatts v8, as of 2026).
  • The 30 percent federal homeowner credit ended December 31, 2025. A 2026 cash or loan buyer in Hyattsville cannot claim it, so we do not count it in the savings math (IRS Residential Clean Energy Credit, as of 2026).

Why your Hyattsville Pepco rate makes solar worth it

The reason solar pays in Hyattsville is the price of the power it replaces, and that price was just corrected. Maryland residential electricity averaged about 22.2 cents per kWh in March 2026, above the national average. That figure made news: in early 2026 EIA mistakenly listed Maryland near 35 cents per kWh, the Maryland Public Service Commission flagged the error, and on June 3, 2026 EIA revised the number down to about 22.2 cents (Maryland PSC; EIA Electric Power Monthly, as of June 2026). That corrected figure is the one we use here. For a Hyattsville household the practical point is simpler: Pepco’s delivery charges have climbed in recent years, so the gap between what you pay the grid and what a panel produces on your roof keeps widening in solar’s favor.

Your production is what turns that rate into savings. A per-address run of NREL PVWatts (v8) for a Hyattsville ZIP (20782) models about 8,254 kWh in year one from a 6 kW system, or roughly 1,376 kWh per kW of panels (NREL PVWatts v8, as of 2026), still a planning figure rather than a promise for your roof. Hyattsville is a close-in, inside-the-Beltway streetcar suburb, so its older homes along the Baltimore Avenue corridor often carry mature tree canopy that shades part of a roof, while the newer infill nearby tends to sit more open. That mix is exactly why a real production number comes from a site visit, not a citywide average.

Free eligibility check

See what solar programs are available in your Hyattsville ZIP code

Solar incentives, net-metering credits, installer availability, and electric rates change by utility and location. Enter your ZIP and we’ll match you with licensed installers who serve your area.


Free to check. About a minute. No credit pull to check.

Submitted securely and used to match you with licensed installers in your area. Some homeowners may qualify for $0-up-front lease/PPA options where available.

What solar could save a Hyattsville home: our own estimate

What makes the Hyattsville math different from a Montgomery County estimate is the last column below, the Prince George’s County credit. We ran the numbers for a local roof and show every input, pairing the corrected Maryland rate with a per-address PVWatts run for ZIP 20782, a typical installed price, and the SREC market, then we add a payback column for the case where you land the county’s $5,000 credit. The result is a planning estimate, not a quote, so treat the inputs as yours to adjust.

Inputs and their sources:

  • Rate: 22.2 cents per kWh, the corrected Maryland residential average for March 2026 (Maryland PSC).
  • Production: about 1,376 kWh per installed kW per year, from a per-address NREL PVWatts v8 run for ZIP 20782 (8,254 kWh on a 6 kW system) (NREL PVWatts v8, as of 2026).
  • Installed cost: about $2.58 per watt before incentives, the U.S. marketplace average for 2026 (EnergySage, as of 2026). Maryland’s 6 percent sales-tax exemption already keeps this lower than it would otherwise be.
  • SRECs: about $45 per certificate, one earned per 1,000 kWh produced, market-set (Flett Exchange Maryland market, as of 2026).
  • County credit (right column only): the Prince George’s County Alternative Energy credit, 50 percent of cost up to $5,000 (DSIRE, as of 2026).
System size Est. annual production (1,376 kWh/kW) Year-one bill savings (22.2 cents) First-year SRECs (~$45 each) Cost before incentives ($2.58/W) Payback with SRECs Payback if you also secure the county $5,000 credit
6 kW about 8,260 kWh about $1,835 about $370 (8.3 SRECs) $15,480 about 7.0 years about 4.8 years
8 kW about 11,010 kWh about $2,445 about $495 (11 SRECs) $20,640 about 7.0 years about 5.3 years
10 kW about 13,760 kWh about $3,055 about $620 (13.8 SRECs) $25,800 about 7.0 years about 5.7 years

Note: the right-hand column is a best case, not a guarantee. The Prince George’s County credit is real and large, but the county funds it from a capped pool (no more than $500,000 in credits countywide per year) and it has run a multi-year waiting list, so plan as if you will wait for it rather than bank on it in year one (Prince George’s County Office of Finance, as of 2026). This estimate also holds today’s rate flat and ignores loan interest. For the method behind numbers like these, see the financial case for whether solar panels are worth it.

Your Hyattsville electric utility is Pepco, not BGE

Prince George’s County is split between two utilities on paper, and Hyattsville sits firmly on the Pepco side. Pepco (Potomac Electric Power Company) serves most of the county, Hyattsville included, while BGE reaches only an outer northern fringe near Laurel, so the Baltimore-focused BGE guidance you find online does not describe your bill or your net metering (Maryland Office of People’s Counsel, as of 2026). Pepco runs your net metering and interconnection under Maryland Public Service Commission rules, so when you read a Maryland solar guide, check that it is describing Pepco and not BGE before you trust its numbers. The full rate and net-metering detail lives on our Pepco net metering in Maryland guide.

What Pepco net metering pays you now, and what changes in 2027

Net metering is the lever that turns a Hyattsville roof into bill savings, and Pepco still runs it at close to full retail. Your meter tracks the difference between what you pull from the grid and what you push back, and because Maryland lets a home system cover up to 200 percent of annual use, you can size for the whole bill rather than a sliver of it (Maryland net metering, DSIRE, as of 2026). At the yearly settlement, leftover credits are cashed out at a lower rate unless you use Maryland’s Net Metering Flexibility Act to keep them rolling at full value, a choice worth making before you finalize system size.

The part that should drive your timing is the 2027 change. Maryland’s 2026 SUNRISE Act (Senate Bill 843) ends today’s one-to-one retail net metering on July 1, 2027, or earlier if the statewide cap is reached, and directs the Public Service Commission to replace it with a lower-value successor tariff (Maryland General Assembly, SB 843, as of 2026). Systems already in service before the cutoff are expected to be grandfathered at today’s terms, so a Hyattsville home that interconnects early keeps the better deal. For the mechanics behind all of this, see how net metering credits your solar exports.

What you are comparing Connect before July 1, 2027 Connect after the change
What each exported kWh is worth Close to the full retail rate (~22 cents) A lower Public Service Commission successor rate
A Hyattsville system installed now Expected to be grandfathered at today’s credit Enrolled on the SUNRISE successor tariff
The annual surplus Settled at a lower rate, or kept rolling at full value under the Flexibility Act Defined by the successor program
Where you interconnect Through Pepco Through Pepco, under the new rules

The Prince George’s County incentives that set Hyattsville apart

This is where a Hyattsville home beats the Maryland average, and where a Montgomery County guide will steer you wrong. Prince George’s County runs its own solar incentives, and because Montgomery and Howard Counties suspended their equivalent credits, the program details here are genuinely different from the nearby PEPCO cities. A Hyattsville homeowner stacks the statewide Maryland benefits with two county programs on top.

Flat-vector diagram of a Hyattsville home stacking a Prince George's County solar credit on top of Maryland state incentives
Incentive What it is worth for a Hyattsville home Status in 2026
Prince George’s County Alternative Energy property-tax credit 50 percent of an owned system’s cost, capped at $5,000 ($1,000 for a leased system) Active, but capped at $500,000 countywide per year and often waitlisted (Office of Finance; DSIRE)
Solarize Prince George’s solar grant Up to $10,000 income-qualified in an Energy Resiliency Community, or up to $5,000 for other owned systems Active campaign; confirm the current enrollment window (Solarize Prince George’s)
Maryland SRECs One certificate per 1,000 kWh, recently about $40 to $55 each, with a certified premium through January 2028 Active, market-set (Flett Exchange)
Maryland sales-tax exemption About 6 percent off equipment, roughly $1,500 on a typical system Active, automatic
Maryland property-tax exemption Solar-added home value is not taxed, under Tax-Property Article Section 7-242 Active, automatic (Maryland statute)
Maryland Solar Access Program grant $750 per kW, up to $7,500 Income-qualified; confirm a current cycle (Maryland Energy Administration)
$1,000 Residential Clean Energy Rebate $1,000 (historical) Ended; closed to new applicants in late 2024

The county credit is the standout, and the honest caveat is the wait. Prince George’s County will credit your property-tax bill for 50 percent of an owned solar system’s cost, up to $5,000, which is one of the most generous county solar credits in Maryland (DSIRE, as of 2026). The catch is supply: the county caps the total it pays out each year and processes applications in turn, so the credit has carried a multi-year waiting list, and you should treat it as money that arrives later rather than a discount at signing (Prince George’s County Office of Finance, as of 2026). Stack it with the statewide benefits, which we keep in full on our Maryland solar guide rather than repeating here, and ask your installer to register your SRECs.

What the federal tax-credit change means for Hyattsville

Two of the most common Hyattsville searches ask whether Maryland gives away solar panels at no cost and whether the 30 percent federal credit still exists, and the honest answers are no and no. No Maryland program hands a homeowner panels at no charge, and the federal Residential Clean Energy Credit (Section 25D) ended for expenditures made after December 31, 2025, under the One Big Beautiful Bill Act, so a Hyattsville homeowner who installs solar with cash or a loan in 2026 cannot claim it (IRS Residential Clean Energy Credit; SEIA, as of 2026). You will still find national pages, and even one county FAQ, that show an old federal percentage; that is out of date for a 2026 homeowner purchase. What is real is the Maryland and Prince George’s County stack above, plus net metering.

If a contractor pitches a federal credit on a lease, read who actually gets it. The only federal solar credit left in 2026 is the commercial one, Section 48E, and it belongs to the business that owns a leased or PPA system, not to you (IRS Clean Electricity Investment Credit, as of 2026). That ownership rule matters more in Hyattsville than almost anywhere, because the Prince George’s County $5,000 credit and your SRECs also follow the system owner, so a buyer who wants to capture the county credit needs to own the system rather than lease it. The homeowner 25D credit is simply gone, having ended after December 31, 2025. For the full timeline, see what the federal solar tax credit change means in 2026.

Who issues your solar permit in Hyattsville: the county, not the city

Here is the Hyattsville detail that catches people used to how Montgomery County works: Hyattsville does not issue its own building permits at all. Unlike the incorporated cities of Rockville and Gaithersburg, which run their own permit offices, Hyattsville has no city permits office, so building permits are strictly a county function and your rooftop-solar building and electrical permits come from Prince George’s County DPIE, the Department of Permitting, Inspections and Enforcement (Hyattsville CDC permitting guide, as of 2026). The City handles things like rental and fence permits, but not your solar.

The good news is that the county has automated it. Prince George’s County DPIE has adopted SolarAPP+, the national instant solar permitting platform, so a standard, code-eligible rooftop solar or battery system from a licensed contractor can clear an automated review rather than wait on a manual one (Prince George’s County SolarAPP+, as of 2026). Your installer uses the platform, and a complex or non-standard job still routes to standard review. When you compare quotes, it is fair to ask each installer to confirm they pull Prince George’s County DPIE permits and use SolarAPP+ where your system qualifies. For how nearby cities differ, see how solar works in Silver Spring, Bowie, and Gaithersburg.

If your home is Your solar permit comes from
In Hyattsville (Prince George’s County) Prince George’s County DPIE, often via SolarAPP+ automated review
In an incorporated Montgomery County city like Gaithersburg That city’s own permitting office
In unincorporated Montgomery County, like much of Silver Spring Montgomery County’s Department of Permitting Services

Solar in the Hyattsville Historic District

Hyattsville wears its history on its streets, and for a small share of homes that adds one review step. Many homes sit within the National-Register-listed Hyattsville Historic District, designated in 1982, a collection of late-1800s and early-1900s houses (City of Hyattsville historic preservation, as of 2026). National Register listing by itself does not regulate what you do to a private home, so for most Hyattsville owners it does not add a solar step.

Note: The review that can apply is a county one, not a city one. If your specific property is one of the more than 20 individually designated Prince George’s County historic sites in Hyattsville, exterior changes that can include visible roof-mounted solar require a Historic Area Work Permit (HAWP) from the Prince George’s County Historic Preservation Commission, under County Code Subtitle 29, before installation (Prince George’s County HAWP guide, as of 2026). If your home is only inside the National Register district and not a county-designated site, that HAWP review is generally not triggered. The City of Hyattsville does not make these designations, so confirm your property’s status with the county before you sign a contract, and an installer experienced with Prince George’s County historic work can plan low-profile placement.

How to choose a solar installer in Hyattsville

Judge installers on objective criteria rather than a ranking, because the right company for your roof is a local decision. The Hyattsville search results are crowded with national directories and out-of-area service-area pages, including companies based in other counties, so use a short, concrete checklist instead of a “best of” list (EnergySage Hyattsville marketplace, as of 2026):

  • A Maryland Home Improvement Commission (MHIC) license, which residential contractors in Maryland are required to carry, plus proof of insurance.
  • NABCEP certification, the solar industry’s recognized installer credential, on the team doing the work.
  • Clear equipment and workmanship warranties in writing, and who honors them if the installer closes.
  • A real Prince George’s County track record: confirm they pull Prince George’s County DPIE permits through SolarAPP+, handle Pepco interconnection, and will register your paperwork for the county Alternative Energy credit and Solarize Prince George’s grant, which an installer who mostly works Montgomery County may not think to do.
  • A written estimate that shows the net-metering and SREC assumptions behind its savings claims, so you can check them against this page. Our guide to the right questions to ask a solar installer walks through each of these.

MySolarFY does not rank or sell installers; we match you with licensed companies that serve your address so you can compare on these criteria yourself. To see how we research these pages and vet the installers we match you with, read how MySolarFY works.

Check which solar programs are available at your Hyattsville address →

Frequently asked questions

Is solar worth it in Hyattsville, MD in 2026?

For most owner-occupied Hyattsville homes with decent sun, yes. Maryland residential electricity averages about 22.2 cents per kWh after a 2026 correction, and Pepco’s delivery rates have been rising, so every kilowatt-hour your roof makes offsets an expensive grid one (Maryland PSC, as of June 2026). Net metering credits a typical home near full retail, Maryland SRECs add income, and Prince George’s County offers a solar credit worth up to $5,000. Using a per-address PVWatts run for ZIP 20782 and a typical installed price, our estimate puts simple payback near 7 years on bill savings and SRECs alone, and closer to 5 years if you secure the county credit. Savings depend on your roof, usage, and financing.

Who is my electric utility in Hyattsville?

Pepco (Potomac Electric Power Company). Pepco serves most of Prince George’s County, including Hyattsville, plus Montgomery County and the District, and it administers your solar net metering under Maryland Public Service Commission rules (Maryland Office of People’s Counsel, as of 2026). BGE serves the Baltimore region and central Maryland and only an outer fringe of Prince George’s County, not Hyattsville, so guidance written for BGE will not match your bill. Check the utility name on your own statement to be sure.

What solar incentives can a Prince George’s County homeowner get in 2026?

The standout is the county’s Alternative Energy property-tax credit, worth 50 percent of an owned system’s cost up to $5,000, which Montgomery County no longer offers (DSIRE, as of 2026). Prince George’s County also runs Solarize Prince George’s, a grant of up to $10,000 for income-qualified homeowners in an Energy Resiliency Community or up to $5,000 for other owned systems (Solarize Prince George’s, as of 2026). On top of those, you get the Maryland stack: net metering, SRECs, the 6 percent sales-tax exemption, and the state property-tax exemption. The county credit is capped and often waitlisted, so plan for a wait.

Who issues my solar permit in Hyattsville?

Prince George’s County DPIE, not the City. Hyattsville has no city permit office, so the building and electrical permits for rooftop solar come from the county’s Department of Permitting, Inspections and Enforcement (Hyattsville CDC, as of 2026). The county has adopted SolarAPP+, an automated instant-permitting platform, so a standard, code-eligible system from a licensed contractor can clear an automated review (Prince George’s County SolarAPP+, as of 2026). This is different from Montgomery County’s incorporated cities like Rockville and Gaithersburg, which issue their own permits. Your installer handles the county permit and the Pepco interconnection.

Do I need historic approval for solar in Hyattsville?

Only if your specific property is an individually designated Prince George’s County historic site. Many Hyattsville homes are inside the National-Register-listed Hyattsville Historic District, but National Register listing alone does not regulate private work (City of Hyattsville, as of 2026). If your home is one of the county-designated historic sites in the city, exterior changes that can include visible solar need a Historic Area Work Permit from the Prince George’s County Historic Preservation Commission under County Code Subtitle 29 before installation (Prince George’s County HAWP guide, as of 2026). Confirm your property’s status with the county first.

Is there still a 30 percent federal solar tax credit in 2026, and is solar ever free in Maryland?

No to both. There is no program that gives Maryland homeowners panels at no charge, and the federal Residential Clean Energy Credit (Section 25D) ended for expenditures made after December 31, 2025, so a Hyattsville homeowner who pays cash or finances a purchase in 2026 cannot claim it (IRS, as of 2026). Some homeowners can still go solar with no up-front cost through a lease or PPA, but that is financing with monthly payments, not free solar, and the company that owns the system keeps the tax benefits. What is real for a buyer is the Maryland and Prince George’s County incentive stack plus Pepco net metering.

Is net metering ending in Maryland?

The current program is changing, not vanishing. Maryland’s 2026 SUNRISE Act (Senate Bill 843) ends today’s one-to-one retail net metering on July 1, 2027, or earlier if the statewide cap is reached, and directs regulators to replace it with a lower-value successor tariff (Maryland General Assembly, SB 843, as of 2026). Systems already in service before the cutoff are expected to be grandfathered at current terms, which is the reason to start early if solar already makes sense for your Hyattsville home.



Reviewed by the MySolarFY Editorial Team, June 2026. Figures were verified against the linked Maryland (Maryland PSC, Maryland Energy Administration, DSIRE), Pepco, Maryland Office of People’s Counsel, EIA, NREL, Prince George’s County (Office of Finance, DPIE, M-NCPPC), City of Hyattsville, and IRS sources as of June 2026; the corrected Maryland rate, net-metering rules and the 2027 SUNRISE sunset, SREC prices, the Prince George’s County credit and Solarize funding, county permitting, and historic-review steps can change, so confirm current terms with Pepco, Prince George’s County, and the Maryland Energy Administration before you decide. MySolarFY does not provide tax or financial advice; consult a licensed professional about your own situation. Learn more about the MySolarFY team and how we work.

MySolarFY is a free service that matches homeowners with licensed solar installers. We are not an installer, financing company, or government program. “No up-front cost” refers to qualifying lease or PPA financing, where eligible homeowners may have no out-of-pocket cost at installation. Lease and PPA terms typically run 20 to 25 years, may include an annual price escalator, and total payments may exceed the cost of a cash purchase; on a lease or PPA the SREC income and tax benefits go to the company that owns the system, not the homeowner. Homeowners do not get the federal residential credit that ended after December 31, 2025. Solar panels are not free and monthly payments apply. Eligibility, savings, incentives, and rates vary and are not guaranteed. See our full disclaimer.

Check My Eligibility