OG&E Net Metering & Solar in Oklahoma (2026 Guide)

Oklahoma home with rooftop solar panels under a wide open sky in OG&E territory
The quick answer (OG&E, Oklahoma, as of August 2026)

OG&E follows Oklahoma’s net-metering rules: your rooftop solar is netted against your usage at the full retail rate each billing period, and any leftover excess is bought back at the lower avoided-cost rate. Oklahoma’s power rate sits below the national average, so strong sun, not high bills, drives the payback. The 30% federal 25D credit ended December 31, 2025.

If OG&E is your electric utility in Oklahoma, this guide explains how rooftop solar credits your bill in 2026, how the buyback works, and how to connect to OG&E. It also covers the 30% federal Residential Clean Energy Credit, which ended December 31, 2025, so a 2026 buyer cannot claim it. OG&E is Oklahoma’s largest electric utility, and like every Oklahoma utility it credits your solar under state net-metering rules set by the Oklahoma Corporation Commission. Oklahoma is not a high-rate state, so the case for solar here is built on some of the best sunshine in the country rather than sky-high bills.

Oklahoma home with rooftop solar panels under a wide open sky in OG&E territory

OG&E and Oklahoma solar at a glance

OG&E runs the interconnection and net-metering process in its Oklahoma service area, while the underlying net-metering rules are set statewide by the Oklahoma Corporation Commission (OCC). For the statewide view beyond OG&E territory, see our Oklahoma solar guide.

Detail What to know
Service territory Central and western Oklahoma, including the Oklahoma City metro, plus a small part of western Arkansas
Oklahoma residential rate About 13.38 cents per kWh (EIA, May 2026), below the national average near 18.44 cents
Net metering Production netted against usage at the full retail rate within each billing period
Excess buyback Leftover excess purchased at the utility’s avoided-cost rate, credited or paid the next billing cycle
System size Sized to no more than 125% of your expected annual use under the state rule
Solar-specific charges Verify any distributed-generation rate, rider, or fee for solar customers directly with OG&E before you sign
Source Oklahoma Corporation Commission, Net Metering

What a typical Oklahoma system produces. According to MySolarFY’s analysis (August 2026), a typical 7 kW rooftop system in the Oklahoma City area produces about 10,700 kWh a year (modeled with NREL PVWatts), worth roughly $1,430 at Oklahoma’s 13.38 cents per kWh residential rate. Your own number depends on your roof, shading, and usage, so treat this as a starting estimate. For what a full system costs across the state, see our Oklahoma solar cost guide. For the mechanics of how those exported kilowatt-hours turn into bill credits, see how net metering credits your solar exports.

How OG&E credits your solar: net metering and the buyback

During each billing period, OG&E nets what you make against what you use at the full retail rate; anything left over is bought back at a lower rate. Under Oklahoma’s net-metering rules (17 O.S. Section 156 and OAC 165:40:9), your on-site solar production offsets your on-site usage at the full retail energy rate, but only up to the amount of energy you actually use at that location during the billing period (OCC). If your panels make more than you use in a period, the utility must purchase that excess at its avoided-cost rate, credited or paid on your next bill. Avoided cost is well below the retail rate, so the smart move in Oklahoma is to size your system close to your annual usage rather than oversizing it to chase a big export payout.

Diagram of Oklahoma net metering: solar exports netted at the full retail rate, leftover excess paid at the avoided-cost rate
Free eligibility check

See what solar programs are available in your ZIP code

Net-metering credits, installer availability, and electric rates change by utility and location. Enter your ZIP and we’ll match you with licensed installers who serve your area.



Free to check. About a minute. No credit pull to check.

Submitted securely and used to match you with licensed installers in your area. Some homeowners may qualify for $0-up-front lease or PPA options where available.

Solar-specific charges: what to verify with OG&E

Confirm your rate and any distributed-generation charges before you sign. Oklahoma law has allowed utilities since 2014 to ask the Oklahoma Corporation Commission to design a separate rate structure for new distributed-generation customers, which can include items like a demand component or a grid-related charge. Whether a specific charge applies to your OG&E account depends on the rate schedule you are on and the current approved tariff, and those change through rate cases. We do not publish a fixed dollar figure here because it is not something we can confirm from a primary OG&E tariff as of August 2026. The practical step is simple: ask OG&E, or have your installer confirm in writing, exactly which residential rate schedule a solar customer is placed on and what, if anything, changes on your bill. A transparent installer will show you this before you commit.

How to connect solar to OG&E in Oklahoma

Connecting a home system follows a set order, and the key rule is that you cannot turn the system on until OG&E grants permission to operate. The general path is:

  1. Interconnection application. You or your installer file a distributed-generation interconnection and net-metering application with OG&E for review.
  2. Review and agreement. After OG&E approves the application, you sign an interconnection agreement that sets the terms for connecting to the grid.
  3. Install and inspect. The system is installed by a licensed contractor and passes your city or county electrical inspection.
  4. Meter set. OG&E installs or reconfigures a meter that measures both the energy you draw and the energy you send back.
  5. Permission to operate. OG&E gives the go-ahead. The system may not run on the grid before this step.

Owning versus leasing on an OG&E account

How you pay for the system decides who keeps the value. This is the trade-off most Oklahoma homeowners weigh:

What to compare Own it (cash or loan) Lease or PPA
Up-front cost Full price up front, or financed over a loan term Often no up-front cost where you qualify
Net-metering bill credits You keep them Often kept by the company that owns the panels
Long-term cost Lower once the system is paid off 20 to 25 year term, may include an annual escalator; total may exceed a cash purchase

A licensed Oklahoma installer normally manages this whole process for you. For the questions to ask before you hire, see the right questions to ask a solar installer, and to understand the total price, our solar cost and savings guide walks through what drives the number.

What changed federally, and what it means for OG&E customers

The federal homeowner credit is gone, but Oklahoma’s strong sun is not. The 30% federal Residential Clean Energy Credit (Section 25D) ended for expenditures made after December 31, 2025, under the One Big Beautiful Bill Act, so an OG&E customer who buys solar with cash or a loan in 2026 cannot claim it (IRS; SEIA). Oklahoma does not offer a statewide residential solar tax credit or rebate to replace it, so honest math in 2026 is built on your bill savings and the state’s high solar output, not on an incentive that no longer exists. For the full timeline, see what the federal solar tax credit change means in 2026.

One federal exception exists, and it is not yours to claim. A separate commercial credit, Section 48E, is claimed by the business that owns a leased or third-party system, not by the homeowner. On a lease or power purchase agreement (PPA) on an OG&E account, you do not file for a federal credit yourself; the company that owns the panels does, and it also typically keeps the net-metering bill credits. If you want the net-metering value in your own name, owning the system through cash or a loan is the path that captures it. The 25D homeowner credit, by contrast, ended December 31, 2025. Our guide to solar financing and comparisons lays out the trade-offs, and the solar basics guide covers how a home system works start to finish.

How to choose a solar installer in OG&E territory

Rather than chasing a “best” list, screen any installer against objective criteria:

  • NABCEP certification, the industry’s professional standard for PV installers.
  • Proper Oklahoma licensing and any required local electrical and building permits.
  • A clear workmanship and equipment warranty in writing.
  • Real experience with OG&E interconnection, so the paperwork and permission to operate go smoothly.
  • A written production estimate and a transparent quote that is honest about the avoided-cost buyback rate and any distributed-generation charges.

MySolarFY matches you with licensed installers that serve your area so you can compare real local quotes side by side, with no obligation.

Frequently asked questions

How does OG&E pay me for excess solar?

Within each billing period, OG&E nets the energy your panels produce against the energy you use at the full retail rate, up to your usage. If you produce more than you use in that period, the utility must purchase the leftover excess at its avoided-cost rate and credit or pay it on your next bill, under Oklahoma’s net-metering rules (Oklahoma Corporation Commission). Avoided cost is lower than the retail rate, so sizing a system close to your yearly usage gives the best result rather than oversizing for a big export payout.

Does OG&E charge solar customers an extra fee?

Oklahoma law has allowed utilities since 2014 to seek a separate rate design for new distributed-generation customers, which can include charges like a demand or grid component. Whether one applies to your account depends on the specific residential rate schedule and the current approved OG&E tariff, and those change through rate cases. We do not publish a fixed figure because we cannot confirm one from a primary OG&E tariff as of August 2026, so ask OG&E or have your installer confirm in writing which rate schedule a solar customer is placed on before you sign.

What happened to the federal solar tax credit?

The 30% federal Residential Clean Energy Credit (Section 25D) ended for expenditures made after December 31, 2025, under the One Big Beautiful Bill Act. An OG&E customer who buys solar in 2026 with cash or a loan cannot claim it. A separate commercial credit (Section 48E) can apply to leased and PPA systems, but the business that owns the system claims it, not the homeowner. Oklahoma net metering was not affected by the federal change.

Does Oklahoma have a state solar tax credit or rebate?

No. Oklahoma does not offer a statewide residential solar income-tax credit or a general state rebate for rooftop solar as of August 2026. The value case in Oklahoma rests on net-metering bill savings and the state’s strong solar production, not on a state incentive. Always confirm any locally advertised program directly with the source before you count on it.

How do I connect solar to OG&E?

You or your installer file a distributed-generation interconnection and net-metering application with OG&E, OG&E reviews and approves it, you sign an interconnection agreement, the system is installed and passes a local electrical inspection, OG&E sets a meter that measures both delivered and exported energy, and then OG&E grants permission to operate. You cannot turn the system on until you have that permission, and a licensed installer usually handles the paperwork for you.


Reviewed and updated for August 2026 by the MySolarFY team. Figures were verified against the linked EIA, NREL PVWatts, Oklahoma Corporation Commission, IRS, and SEIA sources; the avoided-cost buyback rate, OG&E’s residential rate schedules, and any distributed-generation charges change over time, so confirm current terms with OG&E and the Oklahoma Corporation Commission before you decide. MySolarFY does not provide tax or financial advice; consult a licensed professional about your own situation. Learn more about the MySolarFY team and how we work.

MySolarFY is a free service that matches homeowners with licensed solar installers. We are not an installer, financing company, or government program. “No up-front cost” refers to qualifying lease or PPA financing, where eligible homeowners may have no out-of-pocket cost at installation. Lease and PPA terms typically run 20 to 25 years, may include an annual price escalator, and total payments may exceed the cost of a cash purchase; on a lease or PPA the bill credits often go to the company that owns the system, not the homeowner. Homeowners do not get the federal residential credit that ended after December 31, 2025. Solar panels are not free and monthly payments apply. Eligibility, savings, incentives, and rates vary and are not guaranteed. See our full disclaimer.

Check My Eligibility